9
Before rst use
You must allow the fridge to settle for at least twenty four hours prior
to switching the power on.
It is recommended that you clean the interior of the appliance prior to
first use, using a solution of bicarbonate of soda and warm water and
then thoroughly drying the interior.
The fridge may have an odour to it at first use. This will disappear as
the appliance cools.
Please note:
• The appliance will work continuously until it comes down to the
correct temperature.
• It is recommended that the appliance be allowed to run empty
for 24 hours after first switch on, without opening the door. If this
is not possible, do not overload the appliance to allow it to reach
temperature.
• If the appliance is switched o, you should allow five minutes
before switching it on again to prevent unnecessary damage to the
compressor.
• Never store inflammable or explosive items and strong corrosive
acids or alkalis in the appliance.
To Next Page
Loading...
Need help?
General
