25
Reversing the door
5. Rotate the ice box door 180° and secure in position by fitting the
bottom hinge on the left side using the screw removed in step 3.
6. Refit the door catch on the right side using the screw removed in
step 2.
Electrical information
Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A 13 amp
fused plug. To change a fuse in this type of plug, follow the steps below:
1. Remove the fuse cover and fuse.
2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the
fuse cover.
3. Replace fuse cover.
Important: Do not use the appliance without the fuse cover in position.
To Next Page
Loading...
