14
Changing the Light
Bulb
Disconnect the appliance from the
power.
• Release the light cover by pressing
on the hooks at the back of the cover,
then slide it towards the back of the
fridge to remove it.
• Unscrew the light bulb to remove it
and replace with a new bulb of the
same rating (not more than 15W).
• Replace the light cover and reconnect the power.
Troubleshooting
If you have any problems with your appliance, you should check
the troubleshooting prior to calling CDA Customer Care to prevent
unnecessary service calls and potential cost.
If the appliance is not working
• Check there is power to the appliance.
• The green light on the control panel is lit.
• The house fuses are intact and the fuse in the plug has not blown.
• The thermostat is not set to o.
• The plug socket is functioning fine. To check this, plug another
electrical appliance in to see if the socket is faulty.
fig. 6
To Next Page
Loading...
