13
Reversing the Door
It is possible to reverse the door on
this appliance, if required. To do so,
follow the steps below:
1. Loosen the top hinge fixing screws
and remove the top hinge, taking
care to support the weight of the
door.
2. Lift the door from the bottom hinge
and place on a soft surface to
protect the door from damage.
3. Refit the hinge taken from the top
to the opposite lower corner, as in
figure 4.
4. Replace the door and refit the
hinge taken from the lower corner
to the opposite top corner.
5. Adjust the hinges to ensure the
door is aligned correctly.
fig. 4
To Next Page
Loading...
Need help?
General
