24 | Instruction Manual
• This appliance is intended to be connected to the mains supply
with a cable of cross sectional area 1.5 mm²
• The current rating of the fuse or circuit breaker protecting this
appliance should be marked on the socket outlet
• Assembly and electrical connection should be carried out by
specialised personnel
• When installing this product we recommend you seek the help of
another individual
• Should the mains cable be damaged or needs to be replaced, it
should only be done so by a qualified electrician or engineer
• The terminal block on the appliance is clearly marked with regards
to the positions of live, neutral and earth
To Next Page
