Do you have a question about the CDN ProAccurate Q2-450X and is the answer not in the manual?
Install one LR44 battery with the positive (+) side facing up.
Replace the battery cover after installing the battery.
Press ON/OFF to turn on and off. Auto-off activates after 10 minutes of inactivity.
Press the °F/°C button to select Fahrenheit or Celsius temperature readings.
Press HOLD before withdrawing to freeze the reading; 'HOLD' will appear on the display.
Press MAX to display the highest temperature recorded. Returns to normal mode automatically.
Place the stem into a mixture of 3 parts ice and 1 part water.
Press the CAL button for 2 seconds. The display will be blank for 2 seconds.
Release CAL button; 32.0°F/0°C should appear to confirm calibration.
| Type | Digital Thermometer |
|---|---|
| Accuracy | ±1% of reading or ±1°C (±2°F), whichever is greater |
| Material | Stainless Steel |
| Display | LCD |
| Auto-off | Yes |
| Range | -40 to 450°F / -40 to 232°C |
| Resolution | 0.1°F |
| Battery | 1.5V Button Battery |
| Measurement Range | -40 to 450°F / -40 to 232°C |
| Response Time | 6 seconds |
Loading...