CDVI SELWR433-SAT User Manual

Fabricant de Contrôle d’Accès depuis 1985 Manufacturing Access Control since 1985
The installer’s choice
www.erone.com - www.cdvigroup.com
www.erone.com - www.cdvigroup.com
Receiver type: Superheterodyne
Operating frequency: 433,92 MHz
Power supply : 12 Vdc
Current consumption: 24 mA
Output type: Wiegand 26-bit
Operating temperature: -20 to +70 °C
Dimensions: 105 x 45 x 28 mm
Weight: 65 g
Input load: 50 Ohm
READER 2
INPUTS
LOCAL
BUS
READER 1
BATT.
POWER
SUPPLY
BELL
DOOR 2
12V Z6 GND Z7 Z8
C1
NO1 NC1
C2
NO2 NC2
GND Z9 Z10
12V Z1 GND Z2 Z3 GND Z4 Z5
AC22
2-Door Controller
1
2
Plug-in the card into the
7-way connector READER1
or READER2 of the Atrium
mother board AC22
SELWR433-SAT
RG58 - 50 Ohm
Tuned
Antenna
P1
Green LED
[Power]
Red LED
[Wiegand]
The product comes with a 433 Mhz stylo antenna.
F1001000079
Erone S2TR2641E1/E2/E4/E2M
Erone SETR2641AM1/AM2
Erone S3TR2641T2/T2/T4
Erone S7TR2641E4
Erone SETR2641-TM
The receiver ERONE type SELWR433-SAT is a plug-in receiv-
er card, operating at 433,92 Mhz in AM/ASK modulation.
The receiver has a 26-bit wiegand output.
The output connector of the card can be tted on:
Atrium AC22 : reader 1 or reader 2
Atrium A22 : readers - door 2 ( only )
The receiver is provided with an external tuned antenna which
can be xed on the Atrium metal box.
It can be mounted on the top of the
metal box of Atrium ( Fig.A) or on
the side, making use of the L-shape
bracket ( Fig. B)
Fig A
Fig B
1
Introduction
2
Specications
3
Compatible transmitters
4
Layout
5
Mounting the antenna on Atrium box
6a
Plug-in on AC22
6b
Plug-in on A22
Plug-in the card into the 7-way
connector reserved to Door 2 of
the Atrium mother board A22

CDVI SELWR433-SAT Specifications

General

Frequency	433.92 MHz
Output Type	Relay
Max Range	100m
Number of Relays	2
Operating Temperature	-20°C to +70°C
Current Consumption	20 mA
Power Supply	12-24V AC/DC
Compatibility	CDVI transmitters

Summary

Introduction to SELWR433-SAT Receiver

Receiver Specifications

Compatible Transmitters

Receiver Layout Overview

Antenna Mounting on Atrium Box

Plug-in Connections for Atrium Systems

Plug-in on AC22

Connect the receiver card to the 7-way connector on the Atrium AC22 mother board.

Plug-in on A22

Connect the receiver card to the 7-way connector for Door 2 on the Atrium A22 mother board.

Transmitter Memorization Procedure

Programming Transmitter Buttons

Sequence for pressing receiver button and transmitter button for memorization.

Combination Storage

Receiver stores facility code and button, not serial number; max 50 combinations.

Disabling Facility Code Verification

LED Indicators

Memory Reset to Factory Defaults

Important Placement and Warranty Information