ENGLISH
43
STEADY RED LIGHT:
Error Beeps Error Solution
01 1 Driving wheel error Check if the driving wheel is
blocked and unblock it
02 2 Side brush error Check if the side brush is
blocked and clear it
03 3 Motor fan error Empty and clean the dust tank
and clean the suction channel
04 4 Main brush error Check if the main brush is
blocked and unblock it
OTHER ERRORS
Error Status Cause Solution
01 Charging error The charging terminals
on the robot and on the
charging base do not
make good contact
Clean the charging
terminals and make
sure they make good
contact
The charging base is
turned off
Allow the robot
to charge on the
charging base while it
is not operating
02 The robot cannot
operate correctly
The robot is tangled
or stuck by wires or
curtains
If the robot cannot
untangle by itself, do
it manually
05133_Conga 1190 Gyro_Manual_PE.indd 43 1/8/18 12:38
To Next Page
Loading...
