cecotec CONGA 3490 - Dust Tank and Filter Care; Side Brush Maintenance

ENGLISH
35
DUST TANK
1. Open the robot’s cover and take out the dust tank.
2. Open the dust tank, take the high-ef ciency  lter out
and empty the dust.
3. Use the cleaning brush to clean the inner part of the
tank and reinstall the high-ef ciency  lter.
4. Introduce the dust tank back into the robot and close
the top cover.
HIGH-EFFICIENCY FILTER
Remove the high-ef ciency  lter and shake it to remove all the dust.
Note:
• Replace the high-ef ciency  lter every 3 months (depending on the frequency and type
of use).
• Clean the  lter periodically with a brush to avoid blockage.
• Wash the  lter with water and dry it thoroughly before reassembling it. Do not use
detergents.
SIDE BRUSH
Remove and clean the side brushes regularly.
Note: in order to ensure a perfect cleaning, it is suggested to replace
the side brushes every 3 months (depending on the frequency and type
of use).
1
2
3
4