Need help?Do you have a question about the cecotec Conga 3790 and is the answer not in the manual?
General| Shape | Round |
|---|---|
| Product color | Black |
| Housing material | Tempered glass |
| Remotely operated | Yes |
| Dust container type | Bagless |
| Brush type | Roller brush & Side brush |
| Noise level | 64 dB |
| Brush material | Rubber, Silicone |
| Navigation type | Smart iTech Laser 360 |
| Number of brushes | 3 |
| Number of programs | 10 |
| Dust capacity (total) | - L |
| Dirt separating method | Filtering |
| HEPA filtration system | - |
| Vacuum cleaner programs | Mop, Scrubbing, Sweep |
| Floor surfaces supported | Carpet, Hard floor, Laminate, Linoleum, Parquet, Tiles, Wood |
| Number of cleaning patterns | 50 |
| Mobile operating systems supported | Android, iOS |
| Suction power | 2300 Pa |
| Number of filters | 2 pc(s) |
| Package depth | 135 mm |
| Package width | 540 mm |
| Package height | 420 mm |
| Package weight | 6430 g |
| Quantity per pallet | 32 pc(s) |
| Master (outer) case width | 560 mm |
| Master (outer) case height | 440 mm |
| Master (outer) case length | 153 mm |
| Master (outer) case weight | 7040 g |
| Quantity per master (outer) case | 1 pc(s) |
| Battery voltage | 14.8 V |
| AC input voltage | 100 - 240 V |
| Battery capacity | 3200 mAh |
| AC input frequency | 50 / 60 Hz |
Weight and Dimensions| Width | 350 mm |
|---|---|
| Height | 95 mm |
| Weight | 3900 g |
Controls for Auto and Back home modes using the robot's physical buttons.
Introduction to the remote control for operating the robot and its features.
Robot cleans in quadrants, first edge then zigzag motion for comprehensive coverage.
Robot cleans along wall perimeters and furniture for thorough edge cleaning.
Commands to return the robot to the charging base or pause cleaning.
Adjusting suction levels and setting automated cleaning schedules for convenience.
Setting the current time and configuring automated cleaning schedules.
Lists the benefits and advanced features of using the Conga 3000 mobile application.
Step-by-step guide to download, install, and connect the Conga 3000 App.
Details specific cleaning modes such as Spiral, Scrubbing, and Spot available via the app.
Instructions for cleaning, maintaining, and replacing the robot's main brush.
Procedures for cleaning the robot's silicone side brushes.
Procedures for cleaning the robot's Jalisco brush.
How to empty the dust tank and clean the primary dust filter.
Recommendations for cleaning and replacing the high-efficiency filter.
Guidance on cleaning and replacing the robot's side brushes.
Instructions for cleaning the robot's free-fall sensors.
To Next Page