cecotec Conga 7090 - Page 40

40 | CONGA 7090 AI
ENGELSK
Control your robot in an easy and intuitive way.
Activate the cleaning process from any point.
Carry out settings and daily scheduling.
Choose between its dierent cleaning modes: Auto, Spiral, Edge, Manual,
Twice, Restricted area, Spot, Smart area, Back home or Scrubbing.
View how the robot creates an interactive map as it is cleaning.
Manage rooms smartly through its Room Plan function, which allows you to
join, separate or name rooms. Plus, create and schedule your own cleaning
plans by selecting the rooms you want to clean, the mode and power level.
Check the cleaned surface and the time taken.
Check the cleaning history.
The App supports 5 GHz networks.
*This model is compatible with voice virtual assistants Google Assistant
and Alexa
Conguration:
Fig. 24.
Download the Conga 7090 App from App Store or Play Store.
Create an account with your e-mail and a password.
Conrm login.
Add your Conga robot.
Connect to Wi-Fi.
Warnings:
The Wi-Fi name and password cannot exceed 32 bits.
If the network conguration fails to connect, follow the below steps:
Press the power button for 5 seconds, the robot will enter sleeping mode
and the Wi-Fi light indicator will blink fast indicating connection error. Retry
connecting the robot again following the steps in the before section.
If the connection fails again, check if:
a. The robot is too far away from the router.
b. The Wi-Fi password is incorrect.
The following modes can be activated from the App:
Auto mode: Select this mode for the robot fo clean 4x4 m quadrants. Within
this space, it will carry out a rst cleaning cycle in Edge mode and then in
zigzag motion to complete the surface. Once it has nished, it will directly
return to the charging base.
It can be activated from the App or the remote control.
Note: The robot could leave the room to complete the cleaning cycle in some
of the quadrants. This will not aect the robot’s operating, do not worry.