cecotec Conga 7090 - Mobile App and Wi-Fi Connection

CONGA 5490 AI | 39
ENGLESK
Long press the schedule button for 3 seconds. The rst 2 digits, indicating
the hour, will start blinking.
Fig. 22.
Use the up and down direction buttons to set the schedule time. Then, use
the left and right buttons to switch from hours to minutes and repeat the
before step.
Fig. 23.
Press the schedule button again to save the settings.
To cancel the scheduled cleaning, follow the below steps:
Set the clock on the remote control at 00:00 a.m. and save it.
Switch the robot o for 1 minute and switch it on again.
Note: The robot will beep to indicate all settings have been saved.
Warning: When the remote control’s batteries are replaced, the clock and
schedule times must be set again.
ARTIFICIAL INTELLIGENCE
All modes operate with articial intelligence in order to optimise the clean-
ing cycles through obstacle detection and type of oor recognition. Make
sure that the area to be cleaned is properly illuminated. This way, the robot
is able to recognise small objects such as socks, cables, fan support feet or
even pets. This allows the robot to plan cleaning routes avoiding obstacles.
It detects and recognises the type of oor in each room and suggests clean-
ing tips on the type of brush to be used or scrubbing level to be selected for
that specic room according to the type of oor. This information will be
displayed on the App as long as the robot is linked.
Light indicator:
Operating: Steady blue light
Low battery: Orange light blinks slowly.
Charging: Orange light oscillates.
Network conguration: Blue light.
Start-up/rmware update: Blue light oscillates.
Error: Red light ashes quickly.
5. Mobile App and Wi-Fi connection
In order to access all the robot’s functions from wherever you are, it is sug-
gested to download the Conga 7090 App. You will be able to control the ro-
bot in the most ecient way, enjoying the excellence of cleaning.
App advantages: