What to do if my Cecotec Vacuum Cleaner doesn't return to base?
If your Cecotec Vacuum Cleaner does not return to the self-emptying base after finishing Spot cleaning or changing the starting position, it might be because the self-emptying base is too far away from the robot vacuum cleaner. Manually move the robot vacuum cleaner close to the self-emptying base.
General| Model | Conga 7490 Ultimate Home X-Treme |
|---|---|
| Category | Robot Vacuum Cleaner |
| Battery Type | Lithium-Ion |
| Water Tank Capacity | 300 ml |
| Dust Bin Capacity | 600 ml |
| Weight | 3.8 kg |
| Mop | Yes |
| App Control | Yes |
| Solid Tank | No |
| Noise Level | 65 dB |
| Charging Time | 300 min |
| Connectivity | Wi-Fi |
| Compatible Floor Types | Hard floors, carpets |
| Voice Control | Yes (Alexa, Google Assistant) |
| Brush Type | Main Brush, Side Brush |
| Cleaning Modes | Auto, Spot, Edge |
| Runtime | 240 min |
| Dimensions | 34 x 34 x 9.6 cm |
Information on handling, charging, and disposal of the Li-ion battery.
Lists and identifies accessories for the robot vacuum cleaner.
Details the components of the self-emptying base.
Details the components of the mixed tank.
Guide on unpacking, checking parts, and initial setup warnings.
Guide on placing and connecting the robot and its base.
Steps for first cleaning cycle for optimal mapping and battery charging.
Explanation of the robot's buttons and their functions.
Automatic cleaning cycle with route planning and mapping.
Returns the robot to the self-emptying base.
Overview of different cleaning modes available via the app.
Cleans along walls and around furniture.
Thoroughly cleans a specific area in a spiral pattern.
Cleans a specific area in a square-spiral pattern.
Enables vacuuming, scrubbing, and sweeping simultaneously.
Allows manual control of the robot using arrow keys.
Cleans predefined areas after map saving.
Cleans specific rooms based on the saved map.
Cleans a specific small area around a marked point.
Marks specific areas the robot should not clean.
Performs a deep cleaning of the entire house.
Adjusts the robot's suction power (Off, Eco, Normal, Turbo).
Performs a second cleaning cycle immediately after the first.
Allows daily programming of cleaning tasks via the app.
Sets a do-not-disturb time slot, disabling automatic functions.
Allows editing of generated maps (rename, split, combine areas).
Guide on cleaning and replacing the main brush.
Instructions for cleaning and replacing the side brush.
Steps for emptying and cleaning the mixed tank.
How to clean and when to replace the high-efficiency filter.
Information on replacing the primary mesh filter.
Wiping dust from fall-detection sensors for proper navigation.
Cleaning all sensors to prevent navigation errors.
Common problems and their solutions for the robot vacuum cleaner.
Problems and solutions related to the self-emptying base.
To Next Page