cecotec CONGA GRASSHOPPER 300 - Page 128

CONGA GRASSHOPPER 300
128
ENGLISH
EE
Unknown error
1. Restart the mower.
2. If the error still appears on the
display, contact the ocial Cecotec
Technical Support Service.
The mower is
blocked.
You have entered an
incorrect PIN code too
many times
1. You will have to wait for 50 minutes
before trying to enter the PIN again.
2. If you do not remember which one it
is, please contact the ocial Cecotec
Technical Support Service.
Some cable is tangled or damaged
Put on dielectric gloves and unplug the power cable.
1. Unscrew the knob between the extension lead and the adapter.
2. Get a new adapter of the same model and replace it.
3. Restart the mower.
If you notice abnormal vibrations:
1. Switch o the mower.
2. Turn it over.
3. Check the blades for damage. We recommend that you replace all three blades.
4. Turn the mower over and start it up again.
Operation
Why does the mower sometimes hit some obstacles?
- The mower uses a reactive navigation system, whereby it modies its trajectory according
to the obstacles it hits.
How can I restart the mower if I have pressed the STOP button?
- For safety reasons, press + or + on the display.
Why does the mower sometimes stop mowing in certain areas?
- The mower does not detect obstacles, and after knocking several times it will stop cutting
until it detects one area to another in order to continue the task safely.
What is the function of the rain sensor?
- Although the mower can mow when it rains, it is not recommended. If the mower wheels
get muddy, the mowing will be less eective, as wet grass is dicult to cut and also tends
to stick to the blade disc. So, by default, the sensor sends the command to the robot to
charge.