cecotec CONGA WET AND DRY - Operation Procedures; Hose and Accessory Connection; Airflow and Water Addition

ENGLISH
14 Conga Wet&Dry
2. Connect the hose to the cleaner
Insert the hose into the suction channel and turn it clockwise to lock (Fig. 2).
2
3. Connect hose, platic tubes and accessories
3
4
a. Connect the platic tubes (Fig. 3)
b. Connect the tubes to the handle of the
hose (Fig. 4).
c. Connect the tubes to the attachments
(Fig. 5).
Attention
Wet brush only for water. Carpet/Floor Attachment only for dust.
5
4. Airow
Adjust the air ow button to control the power (Fig. 6).
Air ow button
6