What to do if cecotec CONGA WINROBOT EXCELLENCE 970 red light is flashing and beeping?
If the red light is flashing and beeping, it could be due to a disconnected power adapter. Ensure the power adapter is connected, and then press Start to resume operation. Alternatively, during a power cut, carefully use the remote controller to guide the product to a safe location for removal, taking the highest safety precautions.
Why is my Cecotec Vacuum Cleaner driving wheel idling with abnormal path?
The driving wheel may idle, or the walking path may be abnormal, if the glass surface is dirty. Try cleaning the driving wheels and changing the cleaning fibers. Note that this product is not suitable for very dirty glass.
How to fix cecotec CONGA WINROBOT EXCELLENCE 970 Vacuum Cleaner remote control failure?
If the remote control is not working, it might be because only the Start/Pause key functions while the product is active. Pause the product first, and then try using the other keys on the remote controller.
How to fix Cecotec Vacuum Cleaner blue light flashing for too long?
If the blue light flashes for longer than 20 seconds, it might be due to: * Incorrectly installed cleaning fiber: Remove and reinstall the cleaning fiber to ensure it lies flat. * Anti-fall sensor error: Check the anti-fall sensor for any obstructions. * Dirty glass surface: Clean a small area of the glass first to help the product adhere properly.
General| Model | Conga Winrobot Excellence 970 |
|---|---|
| Type | Robot Vacuum Cleaner |
| Run Time | 120 minutes |
| Dust Container Capacity | 0.6 L |
| Dustbin Capacity | 0.6 L |
| Control Method | App, Remote control |
| Suitable Surfaces | Hard floors, carpets |
| Noise Level | 65 dB |
| Connectivity | Wi-Fi |
| Charging Time | 4 hours |
| Control | Remote control, Smartphone App |
| Navigation | Laser Navigation |
| Cleaning Modes | Auto, Spot, Edge |
| Safety System | Anti-Collision and Anti-Drop |
| Compatible Floor Types | Carpets |
To Next Page