cecotec CONGA WINROBOT EXCELLENCE 970 User Manual

ENGLISH
36 CONGA WINROBOT EXCELLENCE 970
2
Red light ashing
and beeps warning
Power adapter not
connected
A. Connect the power rst, and
press Start to make the product
work again.
B. In case of power cut, use remo-
te controller to direct the product
to the place where safely reach it
and remove it.
There is some risk when using
remote controller under power
cut, please make sure that highest
safety precautions are taken.
3
Vacuum not enough
in work status
According to real conditions, use
remote controller to control pro-
duct back to safety position.
There is some risk when using
remote controller under power
cut, please make sure that highest
safety precautions are taken.
Anti-fall sensor error
in work status
Check if there is any dust in the
anti-fall sensors, and clean it. If
it does not work, please contact
customer service.
4
Product driving
wheel idling, walking
path anomalies
Glass surface is dirty
A. Cleaning driving wheels.
B. Change cleaning bers.
This product is not suitable for
too dirty glass.

cecotec CONGA WINROBOT EXCELLENCE 970 Specifications

General

Brand	cecotec
Model	CONGA WINROBOT EXCELLENCE 970
Category	Vacuum Cleaner
Language	English