cecotec Cumbia COFFEE 66 DROP & GO - Parts and Components; Before Use; Operation

COFFEE 66 DROP & GO
36
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Water tank cover
2. Water tank
3. Main body
4. Indicator light
5. Power button
6. Reusable mesh lter
7. Filter holder
8. Brewing unit
9. Cup
10. Base
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the Ocial Cecotec Technical Support Service
immediately.
3. OPERATION
Coee brewing
1. Lift the water tank cover and ll it with potable water.
2. Place three tablespoons of ne ground coee or four tablespoons of regular ground coee
in the reusable mesh lter to make one cup of coee.
Note: regular ground coee requires more coee per cup to reach the intensity of ne ground
coee.