5150
GRANDSOMMELIER 15000/ 20000/ 24000/ BLACK COMPRESSOR
GRANDSOMMELIER 15000/ 20000/ 24000/ INOX COMPRESSOR
GRANDSOMMELIER 15000/ 20000/ 24000/ BLACK COMPRESSOR
GRANDSOMMELIER 15000/ 20000/ 24000/ INOX COMPRESSOR
ENGLISH ENGLISH
8. TECHNICAL SPECIFICATIONS
You can nd more information on this model by scanning the QR code (and the energy label as
well).
Reference: 02340 02341 02342
Model Bolero GrandSommelier
15000 Black
Compressor
Bolero GrandSommelier
20000 Black
Compressor
Bolero GrandSommelier
24000 Black
Compressor
QR code
Capacity 15 bottles 20 bottles 24 bottles
Voltage and
frequency
220-240 V~, 50 Hz
Current 0.6 A
Climate class N (*)
Refrigerant R600a (21 g)
Insulating
foam
Cyclopentane
Lamp power 1 W
Reference: 02343 02344 02345
Model Bolero GrandSommelier
15000 Inox Compressor
Bolero GrandSommelier
20000 Inox Compressor
Bolero
GrandSommelier
24000 Inox
Compressor
QR code
Capacity 15 bottles 20 bottles 24 bottles
Voltage and
frequency
220-240 V~, 50 Hz
Current 0.6 A
Problem Possible cause
The appliance
does not work.
Check the appliance is plugged in.
Check the electrical installation, including the protection elements (circuit
breaker, fuse, etc.).
The appliance
turns on and
o frequently.
The room temperature is too hot.
The device is too full.
The door is opened too often.
The door is not totally closed.
Incorrect temperature control.
The weatherstrip does not seal properly.
The appliance is too close to walls or other objects preventing its proper
ventilation.
The appliance
vibrates.
Make sure the appliance is placed on a stable, at surface and that it is well
levelled.
The appliance
makes too
much noise.
The rattling noise may be caused by the refrigerant’s ow, which is perfectly
normal.
As each cycle ends, you may hear a gurgling sound caused by the owing of
the cooling uid in your appliance.
Make sure the appliance is placed on a stable, at surface and that it is well
levelled.
The inside walls may contract and expand, and this may produce a cracking
noise.
The door does
not close
properly.
The appliance is not placed on a stable surface.
The door is not installed correctly.
The door gasket (weatherstrip) is dirty or bent, or some external element is
not allowing for complete sealing.
The shelves are not well positioned.
There are
water droplets
or a layer of
ice.
Switch o the appliance for 30-40 minutes and remove the water.
WARNING:
Do not try to repair the wine cooler on your own. If the problem persists after the checks
explained, contact a qualied electrician, authorised personnel, the store where you purchased
the product, or the ocial Cecotec Customer Service.