What to do if water leaks from the soleplate of my Cecotec Iron?
If water leaks from the soleplate of your Cecotec Iron, it might be due to several reasons: * The steam switch may be set outside the steam range. Ensure it is set within the steam range. * The iron may not be hot enough. Only press the steam button after the indicator light goes out. * The water level might be above the maximum. Pour out any excess water.
Why is there so little steam coming from my Cecotec Iron?
If your Cecotec Iron produces little steam, there could be a few reasons: 1. The steam switch might not be in the correct position. Make sure it is properly set. 2. The steam outlet orifice might be blocked. Clean it with distilled water. 3. The water tank might be low. Fill up the water tank.
Why is my Cecotec Iron leaking or not producing steam?
If your Cecotec Iron is not producing steam or is leaking, it could be because the temperature/thermostat knob is set to the MIN position. To resolve this, turn the temperature/thermostat knob to select the desired temperature.
What to do if steam burst isn't working on my Cecotec Iron?
If the steam burst or vertical steam function is not working on your Cecotec Iron, it may be because the function has been used too often in a short period, or the iron is not hot enough. Try ironing in a horizontal position and wait before using the steam burst function again.
Why is my Cecotec Iron not spraying?
If your Cecotec Iron is not spraying, it might be due to not enough pressure or air inside. Press the spray nozzle with your hand and press the spray button several times continuously.
General| Power | 3200 W |
|---|---|
| Steam output | 65 g/min |
| Continuous steam | Yes |
| Water tank capacity | 350 ml |
| Soleplate material | Ceramic |
| Weight | 1.5 kg |
| Iron type | Steam iron |
| Self-cleaning function | Yes |
| Anti-calc system | Yes |
| Anti-drip system | Yes |
Procedure for safely filling the appliance's water tank.
Instructions for dry ironing, steam ironing, and vertical steaming.
Details on using steam burst and spray functions.
Steps for cleaning after each use and self-cleaning.
Instructions for cleaning the outer surface and soleplate.
To Next Page