cecotec Total Iron 10100 Pro - Operation; Control Panel Overview; Type of Water Usage

TOTAL IRON 10100 PRO | 23
ENGLESK
4. OPERATION
Control panel
Top: From left to right
1. Autocleaning indicator light
2. Iron
3. Blow
4. Suction
5.Voice(on/o)
6. Garment steamer
7. Water indicator light
Bottom: From left to right
8. Nylon
9. Silk
10. Wool
11. Cotton
12. Linen
13.On/o
Middle: From left to right
14. Preheating light indicator: it turns on while heating.
15.Heatingreadylightindicator:itturnsonwhenpreheatingisnished.
Type of water
It is recommended to use tap water at room temperature to operate the
device. Do not use hot water, perfume, vinegar, starch, detergent, ironing
additives or other chemicals. If water quality in your area is not good becau-
seitcontainstoomuchscale,mixpuriedordistilledwaterwithsometap
water. Warning: Do not use only distilled, descaled or perfumed water.