ENGLISH
2
• CEDIMA® • Technical Documentation • All rights reserved acc. to ISO 16016 • Changes serving technical progress reserved •
This operating manual addresses specialists, users with comparable training and users trained by
specialists!
Read this operating manual carefully before commissioning and clarify any open questions with
CEDIMA®
!
This operating manual is an essential part of the machine, it must be handed over with the machine
and always be kept at hand at the operating location of the machine!
The displayed and listed tools (workshop equipment) and the diamond saw blades are not part of the
standard scope of delivery of the joint cutter!
© Copyright CEDIMA®
Diamantwerkzeug– und Maschinenbauges. mbH
– Technical documentation
Translation of the original operating manual
All rights reserved acc. to DIN ISO 16016. No part of this documentation may be reproduced, adapted,
stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, or translated into a foreign language without the prior written
consent other than permitted under copyright law.
The information contained in this publication may change without prior notice.
CEDIMA® exclusively assumes liability as required by law for these documents.
Furthermore,
CEDIMA® does not accept any liability for errors which may be contained in this
operating manual/spare parts list nor for any incidental or consequential loss or damage that
may arise in connection with the delivery, performance or use of the material beyond the legal
requirements.
Trademarks
Name and logo are registered trademarks of
CEDIMA®
Diamantwerkzeug- und Maschinenbauges. mbH
Celle/Germany
To Next Page
Loading...
