Cedima CF-22 E.800 - Basic Safety Instructions

ENGLISH
9
• CEDIMA® • Technical Documentation • All rights reserved acc. to ISO 16016 • Changes serving technical progress reserved •
Basic safety instructions
for joint cutters
3.0 Basic safety instructions
ATTENTION
Read and observe all operating manuals pertaining to
the joint cutter!
3.1 Icons, symbols, notes
The following signs and symbols are used on the joint
cutter for information of special importance:
DANGER
Warning of a hazard area!
DANGER
Warning of cutting shaft, saw blade!
To move the joint cutter beyond the cutting
area, stop the tool!
Maximum
mountable saw
blade diameter!
Direction of rotation of
saw blade / cutting shaft
Guaranteed sound pressure
level
Read the operating manual!
Use eye protection!
Use hearing protection!
Use foot protection!
Use hand protection!
Use light breathing protection!
The operating manual uses the following terms and
symbols for important information:
Note
Special information regarding the economic use.
Messages marked with the symbol "Note" contain
important information, and it is separated from other text.
ATTENTION
is used for particular comments or statements concerning
accident prevention (i.e. when something is compulsory
or prohibited). The text following the "ATTENTION" symbol
provides instructions which must be precisely observed to
avoid damage to the machine or material and injuries to the
user or a third party.
DANGER
used for crucial statements concerning accident
prevention (i. e. when something is compulsory
or prohibited) in order to avoid injuries to the user or a third
party as well as considerable damage to the machine or
material. The text following the "DANGER" symbol warns the
reader that the user or a third party is likely to be injured if
the instruction given is not observed or if the user does not
proceed as described.
Important statements are printed in italics.
Statements concerning safety are printed in bold and
italics