Cedima CF-22 E.800 - Page 23

ENGLISH
23
• CEDIMA® • Technical Documentation • All rights reserved acc. to ISO 16016 • Changes serving technical progress reserved •
Erection and operation
Joint Cutter CF-22 E.800
4.11 Replacing the diamond saw blade
The diamond saw blade has to be changed:
– after complete wear of the diamond segments
– in case of changes in the material to be cut
The diamond saw blade absolutely must be changed:
– if it is worn down unevenly
– if diamond segments are damaged or have broken o.
When mounting a new diamond saw blade, proceed as
described in section4.2.
4.12 Work to be performed after use
for cleaning and care of the machine, please refer to the
chapter "Maintenance and care".