Cedima CF-22 E.800 - Page 32

ENGLISH
32
• CEDIMA® • Technical Documentation • All rights reserved acc. to ISO 16016 • Changes serving technical progress reserved •
– Feed and drive elements such as toothed racks,
gearwheels, pinions, spindles, spindle nuts,
spindle bearings, wires, chains, sprockets, belts
– Seals, cables, hoses, packings, plugs, couplings
and switches for pneumatic, hydraulic, water,
electricity, fuel systems
– Guide elements such as guide strips, guide
bushes, guide rails, rollers, bearings, sliding
protection supports
– Clamping elements for quick-release systems
– Flushing head seals
– Slide and roller bearings that do not run in an
oil bath
– Shaft oil seals and sealing elements
– Friction and safety clutches,
braking devices
– Carbon brushes, collectors / armatures
– Consumable operating materials
– Easy-release rings
– Control potentiometers and manual
switching elements
– Securing elements such as dowels, anchors,
screws and bolts
– Fuses and lamps
– Bowden cables
– Disks
– Diaphragms
– Spark plugs, glow plugs
– Parts of the reversing starter such as the
starting rope, starting pawl, starting roller and
return spring
– Sealing brushes, rubber seals, splash
protection cloths
– Filters of all types
– Drive and guide wheels/pulleys and associated
rubber tyres
– Cable wire protection elements
– Drive and travel wheels
– Water pumps
– Cut-material transport rollers
– Drilling, separating and cutting tools
– Energy storage devices
8.0 Warranty conditions for construction equipment such as drilling and
sawing machines as well as associated assemblies
1. The supplier must be notied in writing of any evident defects in the machine within 14days of
receipt. If this period has expired or if the machine in question has been operated or worked on, the
machine shall be considered as accepted by the purchaser. Hidden defects are to be notied in writing
immediately on discovery, at the latest however within 6months of receipt of the machine.
2. We guarantee the agreed usability of the device delivered by us for a period of 12months. This
term begins on the day the device arrives with the buyer. Irrespective of this, our obligation shall be
considered as fullled as soon as the goods are dispatched from our works/warehouse. In no case do
we assume a manufacturer’s guarantee. The mandatory regulations of the law for product liability
remain unaected.
3. Wearing parts are subject to a limited warranty. Wearing parts are parts subject to operation-
related wear during proper use of the device. The rate of wear cannot be uniformly dened and diers
according to the intensity of use. The wearing parts must be adjusted, maintained and, if necessary,
replaced for the specic device in accordance with the manufacturer’s operating manual. Operation-
related wear is not a reason for claims to defects.
Wearing parts for the construction devices mentioned in the operating manual such as core drilling
and sawing machines and special machinery as well as related general assemblies (if available):
Appendix