Cedima CF-22 E.800 - Page 34

• DIAMOND SAW BLADES
for wet and dry cutting in concrete, reinforced concrete, asphalt, natural stone;
Sawblade diameter from 110 to 2200 mm
• DIAMOND DRILL BITS
for wet and dry drilling in concrete, reinforced concrete, asphalt, natural stone;
drillbit diameter 12 to 1200 mm
• DIAMOND TOOLS
grinding discs for hand and oor grinders, diamond saw wires,
chamfering discs, diamond saw chains, diamond segments
• JOINT CUTTERS
with petrol, diesel or electric motor, with or without automatic feed; cutting depths
from 120 to 900 mm
• CORE DRILL MACHINES
hand or drill rig machines with electric or hydraulic
drilling motor; drill diameter from 12 to 1250mm
• WALL AND WIRE SAWS
electric, hydraulic and electro-hydraulic wall saws with a cutting depth up to
730mm; wire saw machines, circular saws
• TABLE SAWS
to cut tiles, general construction material or
large-format stones; cutting depth from 25 to 425mm
• SPECIAL MACHINERY
reinforced concrete breakers, oor grinders, surface mills, crack mills, brush
machines, chain saws, hand saws, slurry separators
CEDIMA® Diamantwerkzeug- und
Maschinenbaugesellschaft mbH
Lärchenweg 3 • 29227 Celle/Germany
Phone +49 (0) 5141-88 54-100 • Fax +49 (0) 5141-88 54-111
Internet: www.cedima.com • E-mail: info@cedima.com