7 Quality assurance
6) PATIENT TABLE ONLY
Once the scan process is finished, remove the phantom and the support from the table and press
the P2 button in order to slide out the table from the gantry (default position).
PATIENT TABLE WITH STRETCHER ONLY
Once the scan process is finished, remove the phantom and the support from the table, unlock the
stretcher and slide completely out of the gantry, relock the stretcher then press P2 button in order to
reset the patient table to the default position (facilitated uphill position)
7) Place the patient head support on the table carbon fiber board.
NewTom 5G – User Manual 7-3
To Next Page
