www.cel-robox.com
AutoMaker™ Overview
Once you are happy with your layout, click the Next icon to proceed to the
Settings Screen.
Settings Screen
This part of AutoMaker™ is used for modifying any settings relating to the print
before proceeding to production, including support material, speed/quality and
fill density.
1 Quality Setting 4 Fill Density
2 Custom Print Profile 5 Support Material Setting
3 Profile Summary 6 Brim Width
• Quality Setting
This allows you to select a basic quality setting from the list of options - Dra,
Normal or Fine. The final option - Custom allows you to create a new profile
or to select from a previously created one. To create a new profile, click the
selection box and choose Create New... - for more information on this, see
the User Guide.
• Profile Summary
This displays a brief summary of the currently selected print settings. The
information available is as follows:
• Layer Height in microns (µm).
• Perimeters use - which nozzle is used to print the outside surface
• Infills use - which nozzle is used to print the inside fill of the object.
1
2
3
4
5
6
To Next Page
Loading...