Need help?Do you have a question about the Celestron PowerSeeker 127AZ and is the answer not in the manual?
General| Aperture | 127 mm (5 ") |
|---|---|
| Focal Length | 1000 mm |
| Focal Ratio | f/8 |
| Finderscope | 5x24 |
| Eyepieces | 20 mm, 4 mm |
| Highest Useful Magnification | 300x |
| Optical Design | Newtonian |
| Mount Type | Alt-Azimuth |
Steps 1-5 cover unpacking, setting up the tripod legs, attaching the accessory tray, and securing the tripod.
Steps 6-9 cover inserting and securing the slow motion control rod, and mounting the telescope tube and eyepiece.
Steps 10-16 cover attaching the finderscope, using Barlow/Moon filter, and manual movement adjustments.
Choose a distant object and center it in the main eyepiece for alignment.
Adjust the finderscope's crosshair to match the centered object in the main eyepiece.
Secure the adapter to the eyepiece and attach the smartphone to the holder.
Position the phone camera over the eyepiece and use the focuser to achieve sharp images.
Guide on observing the Moon, including target selection, focusing, and magnification changes.
To Next Page