Celexon Professional Plus - Page 8

4. Insert the housing into
the ceiling cut-out.
Please ensure that the
four threaded rods
are inserted into the
holes of the mounting
brackets. Tighten the
nuts on each threaded
rod to secure the screen
(see fig 4).
5. Move the screen into a
horizontal position
tightening the nuts and
eliminating any gap
between the ceiling and
the trim (Fig 5). Use a
spirit level to ensure that
the screen is perfectly
horizontal.
7
Installation of screen
Figure 4
Figure 5
Nuts
Threaded rods
pass through
the holes
Suspended
ceiling
Suspended
ceiling