CELLALLURE Cool S2 - INSERTING;REMOVING SIM CARDS

2. REMOVING BACK COVER/BATTERY INSTALLATION
1. Li and remove rear case as shown below on the boom le corner of the
phone.
2. Insert the baery matching up the gold terminals on the top le of the
baery and clip in place.
3. Reinstall the back cover and click in place.
3. INSERTING/REMOVING SIM CARDS
• NB: Please ensure your phone is powered “OFF” before inserng SIM cards.
1. SIM Slot 1 takes a standard SIM. Please insert SIM 1 with gold connectors
facing “DOWN” as indicated on the phone itself, taking special note of the
direcon to be inserted. Follow this carefully to avoid damaging your phone or
the SIM. Push gently unl in place.
2. SIM Slot 2 takes a micro SIM, NB: Please insert SIM 2 with gold connectors
facing down as indicated on the phone itself, taking special note of the direcon
to be inserted, follow this carefully to avoid damaging your phone or the SIM
card. Push the SIM gently to lock in place. To remove the SIM cards gently slide
the SIM cards downwards.
SIM slot 1
SIM slot 2
Micro SD slot
4
GENTLY LIFT AND UNCLIP
THE BACK COVER HERE