Cellink BIO X EMD - Build Volume Table

6
02 Technical specicaons
Nozzle Type Tip
Length
Nozzle/ Needle
Length
X Y Z Build Volume
Standard
4 mm 4 mm 12.8 cm 8.5 cm 6.5 cm 702.2 cm
3
Table 1: Theorecal build volume based on nozzle length. Actual volume may vary based on build plate’s thickness, size,
shape and level, as well as on cartridge posion and ghtness of the nozzle. X, Y and Z are measured from the front le
corner of the printbed.