Cellink Inkredible+ - Page 12

B7'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
'
NOTE: The INKREDIBLE Bioprinter is coming in one single piece and SHOULD NOT
be taken apart.
The dual printheads are made to fit Nordson EFD 3mL cartridges.
The pressure pump has a maximum pressure to be set of 7 bars and should be set at
2 bars minimum to have the extruder heads functioning properly.
[1] On/Off Button
[2a] Printhead 1 (Ph 1)
[2b] Printhead 2 (Ph 2)
[3a] Digital Pressure Monitor for Printhead 1
[3b] Digital Pressure Monitor for Printhead 2
[4] LCD Screen
[5] Control Knob
[6] UV Crosslink LED
[7] Printbed
[8a] Pressure Regulator for Printhead 1
[8b] Pressure Regulator for Printhead 2
[9] Connections
[10] X-Axis Stepper Motor