CellSecure E12 CLEO - 3.7.2. Programming Zones for Stay Mode

26
• To program a wired zone to be active in Away Mode, press the corresponding
zone number button on the keypad. The button will light up, indicating that the
zone will be active in Away Mode.
• To deactivate a zone, press the corresponding zone number button on the
keypad. The button light will switch off, indicating that the zone will not be active
in Away Mode.
• When all the zones have been programmed, simply press enter to return to
program mode.
Wireless zones:
• Switch the E12 to Off Mode.
• Enter the 6 digit master code, press the program button followed by enter. The
program button will light up, showing that the E12 is ready to be programmed.
• To program wireless zones, press the Away button, followed by 2
nd
function
followed by enter. The Away and Prog button will light up and all the active
wireless zones will light up. If no zone buttons light up, no wireless zones are
active in Away Mode.
• To program a wireless zone to be active in Away Mode, press the corresponding
zone number button on the keypad. The button will light up, indicating that the
zone will be active in Away Mode.
• To deactivate a zone, press the corresponding zone number button on the
keypad. The button light will switch off, indicating that the zone will not be active
in Away Mode.
• When all the zones have been programmed, simply press enter to return to
program mode.
3.7.2. Programming active zones for Stay Mode
Wired Zones:
• Switch the E12 to Off Mode.
• Enter the 6 digit master code, press the program button followed by enter. The
program button will light up, showing that the E12 is ready to be programmed.
• To program wired zones, press the Stay button, followed by enter. The Stay
button will light up and all the active zones will light up. If no zone buttons light
up, no wired zones are active in Stay Mode.
• To program a wired zone to be active in Stay Mode, press the corresponding
zone number button on the keypad. The button will light up, indicating that the
zone will be active in Stay Mode.
• To deactivate a zone, press the corresponding zone number button on the
keypad. The button light will switch off, indicating that the zone will not be active
in Stay Mode.
• When all the zones have been programmed, simply press enter to return to
program mode.
Wireless zones:
• Switch the E12 to Off Mode.