Cellularline Interphone U-COM 16 - Troubleshooting; Fault Reset Procedure; Factory Reset

23
13. TROUBLESHOOTING
Please visit www.interphone.com for video tutorials and answers to
frequently asked questions.
13.1 Fault reset
When the intercom does not work properly, it is possible to reset the unit
easily, simply by disconnecting the battery for few seconds.
Note: Reset after error will not restore the intercom to factory settings.
13.2 Factory reset
To erase all of your settings and start fresh, the headset can be restored to
factory default settings using the Factory Reset feature.
With U-COM 16 on, enter the conguration menu by pressing the power
key for 10 seconds. Be careful not to release the button before the LED turns
blue, you will hear the message conrming activation of the conguration
menu.
Press the PHONE button twice until you hear the message “Factory reset”,
press once the CENTRAL button to conrm. A voice announcement will be
issued to conrm: "Reset headphones, goodbye".