CEM DT-157 User Manual

• Press left button to enter the menu
• Press up/down button to select the setting
• Press left button to enter the setting
• Press up/down button to select Bluetooth
• Press left button to enter
• Press up/down button to select
• Press left button for ok
3-5. Adjust gray scale (contrast)
The grayscale adjustment: dot matrix LCD display may not be good
in different temperature & humidity, than you can adjust gray scale
to get good LCD display.
• Press left button to enter the menu
• Press up/down button to select the setting
• Press left button to enter the setting
• Press up/down button to select gray scale
• Press left button to enter
• Press up/down button to adjust gray scale
• Press left button for ok
4. System Information
4-1. System version number and gauge serial number display
• Press left button to enter the menu
• Press up/down button to select the setting
• Press left button to enter the setting
• Press up/down button to select information
• Press left button to enter
• View the system information, then press right button to return.
4-2. Data View
View the stored measured data in each mode.
All-delete: Delete all measured data in group.
• Press left button to enter the menu
• Press up/down button to select view
• Press left button to enter view
• Press up/down button to select working mode
• Press left button to enter
11
Coating Thickness Tester User Manual

CEM DT-157 Specifications

General

Brand	CEM
Model	DT-157
Category	Test Equipment
Language	English