22
Non-Contact Forehead InfraRed Thermometer
NOTE 1: At 80MHz end 800MHz the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
a
Field strengths from fixed transmitters, such as base stations for
radio (cellular/cordless) telephones and land mobile radios, amateur
radio, AM and FM radio broadcast and TV broadcast cannot be
predicted theoretically with accuracy. To assess the electromagnetic
environment due to fixed RF transmitters, an electromagnetic site
survey should be considered. If the measured field strength in the
location in which the DT-8807H is used exceeds the applicable RF
compliance level above, the Model Number or Type Number - by
manufacturer should be observed to verify normal operation. If
abnormal performance is observed, additional measures may be
necessary, such as reorienting or relocating the Model Number or
Type Number - by manufacturer.
b
Over the frequency range 150kHz to 80MHz, field strengths should
be less than [Vi] V/m.
To Next Page
Loading...
Need help?
General
