Polarity: Automatic, (-) negative polarity indication.
Overrange: “OL” mark indication.
AC Response: True RMS (50 Hz or 60 Hz)
True RMS: The term stands for “Root-Mean-Square,” which
represents the method of calculation of the voltage or current
value. Average responding multimeters are calibrated to read
correctly only on sine waves and they will read inaccurately on
non-sine wave or distorted signals. True rms meters read
accurately on either type of signal.
Low battery indication: The “ ” is displayed when the battery
voltage drops below the operating level.
Measurement rate: 2 times per second, nominal.
Auto power off: Meter automatically shuts down after approx. 15
minutes of inactivity.
Operating environment: 0
o
C to 50
o
C (32
o
F to 122
o
F) at <
70 % relative humidity.
Storage temperature: -20
o
C to 60
o
C (-4
o
F to 140
o
F) at < 80 %
relative humidity.
For inside use, max height: 2000m
Pollution degree: 2
Power: One 9V battery , NEDA 1604, IEC 6F22.
Dimensions: 150 (H) x 70 (W) x 48 (D) mm
To Next Page
Loading...
Need help?
General
