To Next Page

To Previous Page

 Never apply voltage or current to the meter that exceeds the

specified maximum:

SAFETY SYMBOLS

This symbol adjacent to another symbol, terminal or

operating device indicates that the operator must

refer to an explanation in the Operating Instructions

to avoid personal injury or damage to the meter.

This WARNING symbol indicates a potentially

hazardous situation, which if not avoided, could

result in death or serious injury.

This CAUTION symbol indicates a potentially

hazardous situation, which if not avoided, may

result damage to the product.

This symbol advises the user that the terminal(s) so

marked must not be connected to a circuit point at

which the voltage with respect to earth ground

exceeds (in this case) 500 VAC or VDC.

This symbol adjacent to one or more terminals

identifies them as being associated with ranges

WARNING

CAUTION

MAX

Questions and Answers:

Need help?

Do you have a question about the CEM DT-932N and is the answer not in the manual?

CEM DT-932N Specifications

General