Need help?Do you have a question about the CEM DT-932N and is the answer not in the manual?
General| Brand | CEM |
|---|---|
| Model | DT-932N |
| Category | Multimeter |
| Language | English |
Describes the primary display unit and its symbolic indicators.
Details the primary rotary switch for selecting measurement functions.
Specifies the input jack for high current measurements.
Identifies the common terminal for all measurements.
Indicates the primary input terminal for voltage and resistance measurements.
Details instrument compliance and overvoltage protection categories.
Describes the LCD display capabilities and insulation class.
Covers operating/storage environment, height, pollution degree, power, and dimensions.
Details DC voltage measurement ranges, resolutions, and accuracies.
Specifies input impedance and maximum voltage limits for DC.
Details AC voltage measurement ranges, resolutions, and accuracies.
Specifies AC input impedance, frequency range, and max input.
Details DC current measurement ranges, resolutions, and accuracies.
Details AC current measurement ranges, resolutions, and accuracies.
Details resistance measurement ranges, resolutions, and accuracies.
Specifies the maximum input voltage for resistance measurements.
Details capacitance measurement ranges, resolutions, and accuracies.
Details frequency measurement ranges, resolutions, and accuracies.
Specifies sensitivity and maximum input for frequency measurements.
Details temperature measurement ranges and accuracies.
Identifies the temperature sensor type and overload protection.
Details test current, open circuit voltage, resolution, and accuracy for diode testing.
Specifies audible threshold and test current for continuity checks.
Provides initial setup and basic operational guidelines.
Explains how to interpret and respond to 'OL' display.
Describes the automatic range selection feature.
Details steps to manually select measurement ranges.
Explains how to return to autoranging.
Explains how to start recording maximum and minimum values.
Describes how to view the minimum recorded reading.
Details the procedure to exit the MAX/MIN function.
Warns about potential damage from voltage surges during DC measurements.
Step-by-step guide for measuring DC voltage.
Explains how to read the displayed AC voltage value and symbol.
Warns about risks when measuring AC voltage in outlets.
Warns about potential damage from voltage surges during AC measurements.
Step-by-step guide for measuring AC voltage.
Warns about time limits for 10A scale to prevent damage.
Step-by-step guide for measuring DC current.
Warns about voltage limits when measuring AC current.
Warns about time limits for 10A scale to prevent damage.
Step-by-step guide for measuring AC current.
Warns to disconnect power and discharge capacitors before measuring resistance.
Step-by-step guide for measuring resistance.
Warns against measuring continuity on live circuits.
Step-by-step guide for performing a continuity check.
Explains how to interpret the audible signal and resistance reading.
Warns against testing diodes with voltage applied.
Step-by-step guide for testing diodes.
Explains how to evaluate diode test results.
Step-by-step guide for measuring frequency.
Warns to disconnect power and discharge capacitors before measuring capacitance.
Step-by-step guide for measuring capacitance.
Warns to disconnect probes from voltage before temperature measurement.
Step-by-step guide for measuring temperature.
Warns to remove thermocouple before changing function.
Explains the 'BAT' indicator for battery replacement.
Provides instructions for installing a new battery.
Step-by-step guide for replacing fuses.
Specifies the correct fuse size and type for the 10A range.
To Next Page