MAX/MIN
Note: When using the MAX/MIN function in Autoranging mode, the
meter will “lock” into the range that is displayed on the LCD
when MAX/MIN is activated. If a MAX/Min reading exceeds
that range, an “OL” will be displayed. Select the desired range
BEFORE entering MAX/MIN mode.
1. Press the MAX/MIN key to activate the MAX/MIN recording mode.
The display icon "MAX" will appear. The meter will display and hold
the maximum reading and will update only when a new “max”
occurs.
2. Press the MAX/MIN key again and the display icon "MIN" will
appear. The meter will display and hold the minimum reading and
will update only when a new “min” occurs.
3. To exit MAX/MIN mode press and hold the MAX/MIN key for 2
seconds
DISPLAY BACKLIGHT
Press and hold the
HOLD
key for >1 second to turn on or off the
display backlight function. The backlight will automatically turn off
after 10 seconds.
To Next Page
Loading...