Volume Measurement
For volume measurements, push Area/Volume button twice until the indicator for volume measurement appears
in the display. Afterwards,
press to takes first distance measurement (e.g. length)
press to takes second distance measurement(e.g. width)
The result of the area measurement from the values already measured is displayed in the summary line.
Press to takes the third distance measurement(e.g. height). The value is displayed in the second line.
The result of the area measurement is displayed in the third line, the two previously measured values in lines 1 and 2.
,
Laser Distance Meter User Manual
12
To Next Page
Loading...
Need help?
General
