.3 Initial Operation and Setting
Switches on the instrument and laser.
Press this button longer to switch off the instrument.
The instrument switches off automatically after three minutes of inactivity.
The last action is cancelled or the data display is cleared. If in the mode of History storage, press Storage
button and Clear button simultaneously will clear all storage data in the memory.
The default reference setting is from the rear of the instrument.
Press this button to take the selection from the front edge ,
A special beep sounds whenever the reference setting is changed.
After a re-startup the reference returns automatically to the default
setting (rear reference).
Switching On and Off
Clear Button
Reference Level Setting (See “Figure D”)
Figure D
Laser Distance Meter User Manual
8
To Next Page
Loading...