To Next Page

To Previous Page

ENGLISH

Installation manual Ver. 05-2017

3.1 VISUAL INSPECTION

The packaging must be intact upon receipt, i.e.:

▪ there must not be any sign of collision or breakage;

▪ there must not be any sign that it was exposed to sources of heat, ice,

water, etc...;

▪ there must not be any sign of tampering.

Any deformations indicate that the machine was knocked about during

transport and may compromise proper machine functioning.

3.1.1 Checking the machine and equipment supplied

The main body of the machine, the relative accessories and the equipment

supplied (as agreed with the manufacturer) must be in perfect condition.

The supply is carefully checked before shipment, nevertheless it is advis-

able to check upon receipt that it is complete and in order.

Check that:

▪ the shipping data (addressee, number of packages, order number, etc.) correspond to the accompanying docu-

mentation;

▪ the technical-legal documentation provided with the machine includes the instruction manual for the type of

machine to be installed as well as the EC declaration of conformity or, alternatively, the declaration of the

Manufacturer.

 Intheeventofdefectsand/ormissingmaterialimmediatelynotifythemanufacturerandfollowhisinstructions

    beforeproceedingwithinstallationandstartup.

3.2 UNPACKING

To remove the packaging refer to the “arrow” shown on the outside box.

Operateasfollowstounpackthemachine:

1. cut the plastic safety straps;

2. open the top of the cardboard box;

3. remove the top protection;

4. remove any protective corner pieces;

5. remove the cardboard box pulling it upward;

6. remove any protective “pluriball”;

7. inspect the machine to check for any damage. Immediately inform the carrier and the supplier in the event of

apparent damage.

Keep the packaging materials for possible future shipment of the machine.

ThepackagingusedisincompliancewiththeenvironmentalrequirementssetoutintheEuropeanpackagingregulations

(OfficialECGazette,N.L.365/19).Thecardboardboxescaneasilyberecycled.Theplasticwrappingsaremadeof

materialsfreeofhazardousmetals.Itisadvisabletocontactthecompetentlocalauthorityfortheirdisposal.

3. Unpacking and positioning

Unpacking and positioning

CEMB EZ10 Installation Manual

Other manuals for CEMB EZ10