CEMB K22 - Setup and Calibration; Menu Navigation and Settings; Calibration Procedures

12
*
*
Use and maintenance manual Rev. 12-2010
ENGLISH
7. Setup
7.1 MENU
This is used to personalise some balancer functions and to perform calibrations.To access this section, press the
FUNCTIONS MENU button.
See chapter on UNBALANCE OPTIMIZATION
approximates
1-5g or 0.1-.25 oz
RETURNS TO MEASUREMENT SCREEN
diameter unit of
measure
mm/inch
width unit of
measure
mm/inch
See AUT
O-DIAGNOSTICS
See CALIBRATION
on/off beep
signal
g/oz unit of
measure
unbalance
Calibration of automatic RIM DISTANCE gauge (see SETUP)
Calibration of automatic DIAMETER gauge (see SETUP)
INDICATION
* If such indications fail to appear, contact Technical Service.
Setup