6
2
3
1
4
5
6
Use and maintenance manual Rev. 12-2010
ENGLISH
Machine description
2.1 PURPOSE
It is used to balance the wheels of motorcycles and scoot-
ers (max. wheel weight = 30 kg). It can be operated in
the temperature range of 0° to + 45°C.
The machine can operate only on fl
at non resilient fl oor.
To lift the machine, lever only on the base where the 3
support points are located. never, under any circustance,
apply force to other points such as the spindle, head, or
accessory shelf. It does not need to be fixed to the floor
and does not require wheel guards. The balancer can work
without guards as the balancing speed is 80 rpm. Do not
mount anything other than motorbike.
The main features include:
machine settings menu. ▪
static programme, Unbalance optimization; Self diag- ▪
nostics; Calibration
automatic minimisation of static unbalance ▪
2.2 TECHNICAL SPECIFICATIONS
The following data refers to the balancer in its standard
configuration.
Single phase power supply 115/230 V - 50/60 Hz AC
12-24 V DC (use without motor)
Protection class IP 54
Max absorbed power
0.8 Kw
Cycle time per wheel 6-8 seconds 15 Kg.
Balancing speed < 80 min
-1
Balancing accuracy 1 gram
Position resolution ± 1.4 °
Average noise < 70 dB(A)
Rim width settable 1.5" ÷ 20" or 40 ÷ 510 mm
Settable diameter
10" ÷ 30" or 265 ÷ 765 mm
2.3 DIMENSIONS AND WEIGHTS
The machine complete with flange weighs 110 kg.
2. Machine description
CONTROL PANEL1.
LOCK NUT2.
WEIGHT-TOOL HOLDER3.
AUTOMATIC GAUGE4.
START ROLLER5.
SPINNING LEVER6.
To Next Page
Loading...
