CENS Proflex DX3 - Troubleshooting Common Issues; Resolving Sound and Operation Problems

17
Use these tips to resolve simple issues.
Sound is weak.
CENS ProFlex emits whistling
sounds.
Sound is distorted.
CENS ProFlex emits signal tones.
CENS ProFlex does not work.
Ambient sound not as expected.
Replace empty battery.
Increase volume.
Clean instrument.
Close battery door completely.
Reinsert the instrument until it fits
securely.
Clean instrument.
Replace empty battery.
Lower volume.
Clean instrument.
Gently close battery compartment
completely.
Replace empty battery.
Check if the CENS ProFlex is turned on.
Gently close battery compartment
completely.
Replace empty battery. Make sure
battery is inserted correctly.
Check same mode selected for left and
right device.
Problem Possible Solution
Consult your supplier if you encounter further problems.
Troubleshooting