EasyManua.ls Logo

Centek CT-1901 - Page 44

Centek CT-1901
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
Delayed Washing
End (6 h)
6 7
1000 40 0:59
Delayed Washing
End (3 h)
6 7
1000 40 0:59
Fast Wash 45’ 2 2
800 40 0:45
Fast Wash 30’ 2 2
800 30 0:30
Fast Wash 15’ 2 2
800 Cold 0:15
NOTE:
In order to achieve optimal washing results follow the instructions related to
the maximum weight of the clothes loaded into the machine.
To save electric power choose longer washing programs with lower water
temperatures.
Washing program duration may vary depending on the actual weight and
properties of the laundry, system water temperature and hardness and other
parameters.
ATTENTION
In the event of a power failure the machine will continue the washing cycle from
the moment it was interrupted when power supply resumes.
6.1. AUXILIARY MODES AND FUNCTIONS
PRE
-
WASH
Used for heavily soiled clothes with hard-to-remove stains. This mode can, to
some extent, replace the commonly used manual soaking. The washing machine
drum rotates slower and less frequently than during an ordinary wash cycle,
while the detergent gradually penetrates the fibers of the fabric. Low water
temperature is used for the pre-wash: this prevents dirt from “eating” into the
fabric at a high temperature.
NOTE: Please remember that, for the main wash in this case you will have
to use detergent powder or add liquid detergent to the main wash detergent
compartment after completion of the pre-wash. If you pour liquid detergent into
the tray in advance, it will immediately flow into the drum, and by the time the
main wash starts, none will remain in the tray.
ADDITIONAL RINSE
Activating this mode will add one more rinsing cycle. It is used for more
thoroughly removing the detergents from the laundry. This is important for
children’s clothes and for people suffering from allergies.
NO DRYING FUNCTION
Activating this function will disable the drying mode. Use it for clothes requiring
careful handling (e.g. for wool, fine fabrics, sports thermal underwear, etc.).
SILENT MODE
Select the washing program, then press and hold the “Pre-Wash” activation
button for 3 seconds. This will disable all audio signals and notifications. Re-
activate the sounds in the same way.
CHILD LOCK FUNCTION
This function is activated after a program is selected and started. Press
simultaneously the «Additional Rinse» and «No drying» buttons and hold them
for 3 seconds. All functions and modes of the machine (except the shutdown
button) will become inaccessible. This will allow ensuring and controlling the
safety of your children and the appliance.
ATTENTION
For added safety, the «Child Lock» function stays active even after program
completion and machine shutdown. In order to deactivate the function repeat the
same actions as for activating it.
DRUM CLEANING
The drum of the washing machine contacts dirty clothing and detergents.
Bacteria and detergent residues can accumulate in the drum over time. High
humidity inside the machine which lasts for a long time after laundry completion,
contributes to the buildup of mould and putrid smell.
In order to extend the service life of the washing machine and keep the drum
clean, wipe the inside of the drum (including the folds of the rubber seal) dry
after each laundry and regularly use the «Drum Cleaning» function.
1. Before activating the drum cleaning function, ensure that there is nothing left
in the drum.
2. Add a special drum cleaning detergent for automatic washing machines into
the main wash detergent compartment and start the cleaning program. The
cleaning is performed at 90 °С.
3. Add a special drum cleaning detergent into the main wash detergent
compartment.
4. Select the «Drum Cleaning» function and press the «Start/Pause».
5. Wait for the program to complete and wipe the inside of the drum with a soft
dry cloth.
7. MAINTENANCE
ATTENTION
Attention! Always pull the plug from the electric socket and close the water
supply valve before cleaning, care and maintenance described below.
Never use solvents for cleaning to avoid damage to the washing machine and
the emission of toxic or explosive gases.
Do not spill water on the washing machine while cleaning.
Do not use PCMX (chloroxylene) -containing detergents, ethyl alcohol, formic
acid or their equivalents for cleaning the appliance, as these substances can
damage it.
CLEANING THE APPLIANCE
Regular and careful cleaning of the appliance will allow
extending its service life and retain its appealing exterior. If
necessary wipe the outer surface of the machine with a mild,
non-abrasive detergent. In case of a water spill, immediately
collect the water with a towel. Do not use sharp objects to
clean the machine to avoid damaging the housing and
impeding its operation.
ATTENTION
Never use aggressive chemicals, abrasive cleaning agents or solvents for
cleaning the appliance. They can damage the exterior finish.
CLEANING THE INSIDE OF THE DRUM
Wipe the drum dry after each use to remove any residues from the tap water,
washing chemicals, dirt and fabric particles, as well as to prevent additional
moisture from staying inside the drum and causing mould growth.
Metal clothing components (buttons, zippers, studs) can leave rust stains inside
the drum – take care to remove these stains without delay. The use of aggressive
detergents or rust removers for cleaning the drum is not allowed, therefore
regular preventive care is the best solution.
Besides, the washing machine has «Drum clean» function to assist you in
hygiene maintenance.

Related product manuals