Why won't SMART mode activate on my Centek CT-1954 Washer?
If your Centek Washer SMART mode will not activate, ensure that you select SMART mode immediately after turning the machine on. If another mode was selected first, turn the machine off and then press SMART. Also, check for a load imbalance.
What to do if my Centek CT-1954 Washer will not drain or spin and shows error code «?0?»?
If your Centek Washer isn't draining water, or spinning, or if you see error code «?0?» on the display, check the following: * Ensure the pump filter isn't blocked. * Make sure the drain hose isn't kinked or twisted. * Verify that hose end plugs were removed during installation. * Check that the drain hose or sink/sewage header isn't blocked.
Why won't my Centek CT-1954 Washer program start?
If your Centek Washer program won't start, check these items: * Ensure the door is fully closed. * Press the ON/OFF button. * Press the Start/Pause button. * Confirm the water supply valve is open, allowing water intake. Also, check if Delayed Start is activated.
What to do if my Centek Washer constantly fills and drains water?
If your Centek Washer is constantly filling and draining water, or water remains in the drum, or the washing program stops, check these items: * Ensure the uppermost point of the drain hose is located 65 to 100 cm above the floor. * Verify the drain hose connection to the sink/sewage header isn't causing backflow. * Make sure the drain hose end is placed above the sink bottom to prevent water from flowing back. * Ensure the drain hose end isn't inserted too deep into the sewage pipe.
Why is my Centek Washer vibrating so much during spinning?
If your Centek Washer is vibrating strongly during spinning, check the following: * Make sure the machine is leveled. * Ensure the transport bolts have been removed. * Verify the machine isn't touching any furniture or walls. * Check for an imbalanced load.
What to do if my Centek Washer won't fill with water and shows error code «?02»?
If your Centek Washer won't fill with water or displays error code «?02», check the following: * Ensure the water supply hose isn't jammed, kinked, or twisted. * Make sure the water supply tube is connected to the water supply line. * Verify the water pressure isn't too low and the water supply valve is open. * Confirm there's water in the supply system. * Check if the intake valve filter is blocked. * Ensure the Start/Pause button is pressed.
Why is my Centek CT-1954 not drying clothes properly?
If you are experiencing a low drying effect with your Centek Washer, avoid loading hard-to-dry clothes (like dense cotton) with easy-to-dry items (like synthetic fabric) simultaneously. Do not overload the machine for drying and avoid loading wet and dry clothes together for the Drying program. Also, ensure the water supply valve is closed during drying, and verify that the drain pump filter is not blocked and the drain hose isn't kinked, twisted, or blocked.
How to get rid of a bad smell from my Centek Washer?
If your Centek Washer has a smell, run the «Drum Cleaning» program.
Why won't the door on my Centek CT-1954 Washer open?
If your Centek Washer door won't open, it will remain locked until the lock icon on the control panel goes out after the program is completed.
Why is my Centek CT-1954 leaking from somewhere else?
If your Centek Washer has other leaks, check the water supply tube fittings to ensure they are not loose. Check both the machine body and tap fittings. If the fittings are tight but still leak, replace the gaskets in the tube connections. Also, make sure the drain hose is correctly fastened.
Proper placement and environmental considerations for the washing machine.
Ensuring the machine is stable and level for proper operation.
Instructions for connecting the inlet tubes and drain hose to water sources.
Guidance on properly connecting the drain hose to prevent issues.
Connecting the washing machine to the electrical power supply.
Guidance on sorting clothes, checking labels, and preparing garments for washing.
Overview of buttons, indicators, and display elements on the control panel.
Detailed descriptions of available washing programs and modes.
Guide to identifying and resolving common washing machine issues.
General| Type | Washing Machine |
|---|---|
| Installation type | Freestanding |
| Loading type | Front-load |
| Maximum load capacity | 6 kg |
| Maximum spin speed | 1000 RPM |
| Energy efficiency class | A |
| Washing class | A |
| Spin class | C |
| Control type | Electronic |
| Color | White |
| Special programs | Quick wash, Delicate, Wool |
| Additional features | Child lock |
To Next Page