Pg. 3380231-EN-V2025-02-14
IMPORTANT NOTE: This treadmill does come pre-lubricated from the factory, but it is recommended to
check your running belt and deck before first use as the silicone oil can dry over time. If the running belt
and deck appear dry, then follow the steps below.
Lubricating the running deck and belt is essential as the friction between the two affects the life span and
function of the treadmill. Therefore, it is suggested the running belt and deck be inspected regularly.
Always unplug the treadmill from the electrical outlet before cleaning, lubricating or repairing the unit.
Follow these instructions to lubricate the running belt and deck:
1. Attach the extension tube to the bottle of lubricant. This extension tube allows you to evenly apply lubricant across
the entire width the of the running belt and deck.
2. Raise the running belt up on one side and evenly apply lubricant across the width of the running deck. Ideally, the
lubricant should be applied where the feet contact the deck when running, as this is where it is most needed. Use
a rag to thoroughly wipe the lubricant over the running deck. Repeat this process to the other side.
RECOMMENDED LUBRICATION SCHEDULE
LIGHT USE (LESS THAN 3 HOURS / WEEK) EVERY 6 MONTHS
MEDIUM USE (3 - 5 HOURS / WEEK) EVERY 3 MONTHS
HEAVY USE (MORE THAN 5 HOURS / WEEK) EVERY 2 MONTHS
RUNNING
BELT
RUNNING
DECK
EXTENSION TUBE
SILICONE OIL
BOTTLE
To Next Page